Basic Striped Beanie

Basic Striped Beanie, coliescrochet.comThe Basic Striped Beanie is a simple pattern that you can whip up in less than 2 hours. It is unisex in construction and is a great hat for newborns through adults. It can be highly personalized with the number of stripes and colors. I originally designed this pattern for charity beanies but found that I loved the pattern so much, I use it quite often for gifts as well.

 

Sizes:

  • Newborn fits 14” head circumference
  • Infant (3 months) fits 16” head circumference
  • Baby (6 months) fits 18” head circumference
  • Toddler (1–2 years) fits 19” head circumference
  • Preschooler (3-5 years) fits 20” head circumference
  • Child (6-10 years) fits 21” head circumference
  • Teen/Small Adult fits 22” head circumference
  • Medium Adult fits 23” head circumference
  • Large Adult fits 24” head circumference

 

Skill Level:

  • Easy

 

Materials:

  • I-5.5 mm hook; I use a Clover hook which I have found creates a slightly smaller gauge. I also tend to be a really tight crocheter. For these two reasons, I highly recommend working up a gauge swatch ahead of time. (See below in Pattern Notes for directions on working up a gauge swatch). You may need to go up or down one or two hook sizes
  • Worsted Weight Yarn – I Love This Yarn by Hobby Lobby. Less than 100 grams or 175 yards total for hat. Amounts of each color depend on how many colors you are adding to your hat. Aran yarn would be an acceptable substitute if you don’t have access to worsted weight yarn.
  • Yarn or Tapestry needle

 

Gauge:

  • 15 hdc and 11.5 rows = 4” square; use a different size hook or yarn to obtain proper gauge (See below in Pattern Notes for directions on working up a gauge swatch)

 

Abbreviations and Stitches Used: (In US terminology)

  • Ch – chain stitch
  • Hdc – half double crochet
  • MC – Magic Circle
  • Rnd(s) – round(s)
  • Sc – single crochet
  • Sl st – Slip Stitch
  • St – stitch

 

Pattern Notes:

  • Pattern is written in US terms
  • Read pattern in its entirety first
  • Always work a gauge swatch first. Each crocheter crochets with a different tension. I tend to crochet really tight. To complete a gauge swatch, I crochet a 5”x5” square in the stitch or pattern specified. This is so that at least the first and last row and the sides will not be included in my 4”x4” square. I then measure how many stitches and rows are in my square. If it is too small (you have more stitches or rows than specified), then you move up a hook size or two. If it is too big (you have fewer stitches or rows than specified), then you move down a hook size or two. The goal is to reach a gauge that is as close as possible to the pattern writer’s. It may seem like a waste of time, but I always find that it is worth it in the end; especially with fitted, wearable items. If you are not within ¼” when I give the diameter measurement for the crown of the hat in each pattern size, you should check your gauge and work a gauge swatch if you haven’t already.
  • When working in rounds, I always start with a magic circle; there are many great tutorials on the internet
  • When working in rounds, the ch1 or ch2 NEVER count as the first stitch

 

For this tutorial, I will be working the Child size in 3 colors. All other sizes can be found below.

 

Child (6-10 years)

Rnd 1: With Color A, MC, ch1, work 8 hdc in circle. Join with sl st to 1st stitch. Pull tail tight. Ch 1. (7 total stitches)

Rnd 2: Work 2 hdc in each st around. Join with sl st to 1st stitch. Ch 1. (16)

Rnd 3: *Work 2 hdc in 1st st, work 1 hdc in next st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (24)

Rnd 4: *Work 2 hdc in 1st st, work 1 hdc in next 2 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (32)

Rnd 5: *Work 2 hdc in 1st st, work 1 hdc in next 3 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (40)

Rnd 6: *Work 2 hdc in 1st st, work 1 hdc in next 4 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (48)

Rnd 7: *Work 2 hdc in 1st st, work 1 hdc in next 5 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (56)

Rnd 8: *Work 2 hdc in 1st st, work 1 hdc in next 6 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (64)

*Pause here and make sure the crown measures approximately 5.75“ in diameter.Basic Striped Beanie, coliescrochet.com

Rnd 9: Work 2 hdc in 1st st, work 1 hdc in next 21 st; *work 2 hdc in next st, work 1 hdc in next 20 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (67)

Rnd 10: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1. (67)

Rnd 11: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.Basic Striped Beanie, coliescrochet.com

Rnd 12: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 13: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

Rnd 14: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1.

Rnd 15: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 16: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 17: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnds 18 – 20: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

*Pause here and make sure the length of the hat measures just short of 7“ from crown to bottom of hat when folded in half. If not, continue to add rows of Color A then switch to Color C.

Basic Striped Beanie, coliescrochet.com

Rnd 21: Work 1 sc in each st around hat. Join with sl st to 1st stitch. Finish off.

 

Finishing

Weave in all ends.

Basic Striped Beanie, coliescrochet.comBasic Striped Beanie, coliescrochet.com

 

 

 

 

 

 

Newborn

Rnd 1: With Color A, MC, ch1, work 8 hdc in circle. Join with sl st to 1st stitch. Pull tail tight. Ch 1.  (8 total stitches)

Rnd 2: Work 2 hdc in each st around. Join with sl st to 1st stitch. Ch 1.   (16)

Rnd 3: *Work 2 hdc in 1st st, work 1 hdc in next st;* repeat from * to * Join with sl st to 1st stitch. Ch 1.   (24)

Rnd 4: *Work 2 hdc in 1st st, work 1 hdc in next 2 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1.   (32)

Rnd 5: *Work 2 hdc in 1st st, work 1 hdc in next 3 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1.   (40) Switch to Color B.

*Pause here and make sure the crown measures approximately 3.75“ in diameter.

Rnd 6: Work 2 hdc in 1st st, work 1 hdc in each stitch around. Switch to Color A. Join with sl st to 1st stitch. Ch 1. (41)

Rnd 7: Work 1 hdc into each st Switch to Color C. Join with sl st to 1st stitch. Ch 1. (41)

Rnd 8: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1.

Rnd 9: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 10: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 11: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnds 12 – 13: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

*Pause here and make sure the length of the hat measures just short of 4.5“ from crown to bottom of hat when folded in half. If not, continue to add rows of Color A then switch to Color C.

Rnd 14: Work 1 sc in each st around hat. Join with sl st to 1st stitch. Finish off.

 

Infant (3 months)

Rnd 1: With Color A, MC, ch1, work 8 hdc in circle. Join with sl st to 1st stitch. Pull tail tight. Ch 1. (8 total stitches)

Rnd 2: Work 2 hdc in each st around. Join with sl st to 1st stitch. Ch 1. (16)

Rnd 3: *Work 2 hdc in 1st st, work 1 hdc in next st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (24)

Rnd 4: *Work 2 hdc in 1st st, work 1 hdc in next 2 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (32)

Rnd 5: *Work 2 hdc in 1st st, work 1 hdc in next 3 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (40)

Rnd 6: *Work 2 hdc in 1st st, work 1 hdc in next 4 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (48)

*Pause here and make sure the crown measures between 4” and 4.25“ in diameter.

Rnd 7: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1. (48)

Rnd 8: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 9: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

Rnd 10: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1.

Rnd 11: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 12: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 13: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnds 14 – 15: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

*Pause here and make sure the length of the hat measures just short of 5“ from crown to bottom of hat when folded in half. If not, continue to add rows of Color A then switch to Color C.

Rnd 16: Work 1 sc in each st around hat. Join with sl st to 1st stitch. Finish off.

 

Baby (6 months)

Rnd 1: With Color A, MC, ch1, work 8 hdc in circle. Join with sl st to 1st stitch. Pull tail tight. Ch 1. (8 total stitches)

Rnd 2: Work 2 hdc in each st around. Join with sl st to 1st stitch. Ch 1. (16)

Rnd 3: *Work 2 hdc in 1st st, work 1 hdc in next st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (24)

Rnd 4: *Work 2 hdc in 1st st, work 1 hdc in next 2 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (32)

Rnd 5: *Work 2 hdc in 1st st, work 1 hdc in next 3 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (40)

Rnd 6: *Work 2 hdc in 1st st, work 1 hdc in next 4 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (48)

Rnd 7: *Work 2 hdc in 1st st, work 1 hdc in next 5 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (56)

*Pause here and make sure the crown measures approximately 4.75“ in diameter.

Rnd 8: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1. (56)

Rnd 9: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 10: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

Rnd 11: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1.

Rnd 12: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 13: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 14: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnds 15 – 16: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

*Pause here and make sure the length of the hat measures just short of 5.5“ from crown to bottom of hat when folded in half. If not, continue to add rows of Color A then switch to Color C.

Rnd 17: Work 1 sc in each st around hat. Join with sl st to 1st stitch. Finish off.

 

Toddler (1–2 years)

Rnd 1: With Color A, MC, ch1, work 8 hdc in circle. Join with sl st to 1st stitch. Pull tail tight. Ch 1. (8 total stitches)

Rnd 2: Work 2 hdc in each st around. Join with sl st to 1st stitch. Ch 1. (16)

Rnd 3: *Work 2 hdc in 1st st, work 1 hdc in next st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (24)

Rnd 4: *Work 2 hdc in 1st st, work 1 hdc in next 2 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (32)

Rnd 5: *Work 2 hdc in 1st st, work 1 hdc in next 3 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (40)

Rnd 6: *Work 2 hdc in 1st st, work 1 hdc in next 4 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (48)

Rnd 7: *Work 2 hdc in 1st st, work 1 hdc in next 5 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (56)

Rnd 8: *Work 2 hdc in 1st st, work 1 hdc in next 13 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (60)

*Pause here and make sure the crown measures between 5” and 5.25“ in diameter.

Rnd 9: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1. (60)

Rnd 10: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 11: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

Rnd 12: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1.

Rnd 13: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 14: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 15: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnds 16 – 18: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

*Pause here and make sure the length of the hat measures just short of 6“ from crown to bottom of hat when folded in half. If not, continue to add rows of Color A then switch to Color C.

Rnd 19: Work 1 sc in each st around hat. Join with sl st to 1st stitch. Finish off.

 

Preschooler (3-5 years)

Rnd 1: With Color A, MC, ch1, work 7 hdc in circle. Join with sl st to 1st stitch. Pull tail tight. Ch 1. (7 total stitches)

Rnd 2: Work 2 hdc in each st around. Join with sl st to 1st stitch. Ch 1. (14)

Rnd 3: *Work 2 hdc in 1st st, work 1 hdc in next st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (21)

Rnd 4: *Work 2 hdc in 1st st, work 1 hdc in next 2 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (28)

Rnd 5: *Work 2 hdc in 1st st, work 1 hdc in next 3 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (35)

Rnd 6: *Work 2 hdc in 1st st, work 1 hdc in next 4 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (42)

Rnd 7: *Work 2 hdc in 1st st, work 1 hdc in next 5 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (49)

Rnd 8: *Work 2 hdc in 1st st, work 1 hdc in next 6 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (56)

*Pause here and make sure the crown measures between 5.25” and 5.5“ in diameter.

Rnd 9: *Work 2 hdc in 1st st, work 1 hdc in next 7 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (63)

Rnd 10: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1. (63)

Rnd 11: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 12: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

Rnd 13: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1.

Rnd 14: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 15: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 16: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnds 17 – 19: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

*Pause here and make sure the length of the hat measures just short of 6.5“ from crown to bottom of hat when folded in half. If not, continue to add rows of Color A then switch to Color C.

Rnd 20: Work 1 sc in each st around hat. Join with sl st to 1st stitch. Finish off.

 

Teen/Small Adult

Rnd 1: With Color A, MC, ch1, work 7 hdc in circle. Join with sl st to 1st stitch. Pull tail tight. Ch 1. (7 total stitches)

Rnd 2: Work 2 hdc in each st around. Join with sl st to 1st stitch. Ch 1. (14)

Rnd 3: *Work 2 hdc in 1st st, work 1 hdc in next st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (21)

Rnd 4: *Work 2 hdc in 1st st, work 1 hdc in next 2 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (28)

Rnd 5: *Work 2 hdc in 1st st, work 1 hdc in next 3 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (35)

Rnd 6: *Work 2 hdc in 1st st, work 1 hdc in next 4 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (42)

Rnd 7: *Work 2 hdc in 1st st, work 1 hdc in next 5 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (49)

Rnd 8: *Work 2 hdc in 1st st, work 1 hdc in next 6 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (56)

Rnd 9: *Work 2 hdc in 1st st, work 1 hdc in next 7 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (63)

*Pause here and make sure the crown measures approximately 6“ in diameter.

Rnd 10: Work 2 hdc in 1st st, work 1 hdc in next 7 st; *work 2 hdc in next st, work 1 hdc in next 6 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (71)

Rnd 11: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1. (71)

Rnd 12: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 13: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 14: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

Rnd 15: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1.

Rnd 16: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 17: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 18: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnds 19 – 22: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

*Pause here and make sure the length of the hat measures just short of 7.5“ from crown to bottom of hat when folded in half. If not, continue to add rows of Color A then switch to Color C.

Rnd 23: Work 1 sc in each st around hat. Join with sl st to 1st stitch. Finish off.

 

Medium Adult

Rnd 1: With Color A, MC, ch1, work 8 hdc in circle. Join with sl st to 1st stitch. Pull tail tight. Ch 1. (7 total stitches)

Rnd 2: Work 2 hdc in each st around. Join with sl st to 1st stitch. Ch 1. (16)

Rnd 3: *Work 2 hdc in 1st st, work 1 hdc in next st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (24)

Rnd 4: *Work 2 hdc in 1st st, work 1 hdc in next 2 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (32)

Rnd 5: *Work 2 hdc in 1st st, work 1 hdc in next 3 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (40)

Rnd 6: *Work 2 hdc in 1st st, work 1 hdc in next 4 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (48)

Rnd 7: *Work 2 hdc in 1st st, work 1 hdc in next 5 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (56)

Rnd 8: *Work 2 hdc in 1st st, work 1 hdc in next 6 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (64)

Rnd 9: *Work 2 hdc in 1st st, work 1 hdc in next 7 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (72)

*Pause here and make sure the crown measures between 6.25” and 6.5“ in diameter.

Rnd 10: *Work 2 hdc in 1st st, work 1 hdc in next 23 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (75)

Rnds 11 – 13: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1. (75)

Rnd 14: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 15: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

Rnd 16: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1.

Rnd 17: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 18: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 19: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnds 20 – 24: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

*Pause here and make sure the length of the hat measures just short of 8.5“ from crown to bottom of hat when folded in half. If not, continue to add rows of Color A then switch to Color C.

Rnd 25: Work 1 sc in each st around hat. Join with sl st to 1st stitch. Finish off.

 

Large Adult

Rnd 1: With Color A, MC, ch1, work 7 hdc in circle. Join with sl st to 1st stitch. Pull tail tight. Ch 1.  (7 total stitches)

Rnd 2: Work 2 hdc in each st around. Join with sl st to 1st stitch. Ch 1. (14)

Rnd 3: *Work 2 hdc in 1st st, work 1 hdc in next st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (21)

Rnd 4: *Work 2 hdc in 1st st, work 1 hdc in next 2 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (28)

Rnd 5: *Work 2 hdc in 1st st, work 1 hdc in next 3 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (35)

Rnd 6: *Work 2 hdc in 1st st, work 1 hdc in next 4 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (42)

Rnd 7: *Work 2 hdc in 1st st, work 1 hdc in next 5 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (49)

Rnd 8: *Work 2 hdc in 1st st, work 1 hdc in next 6 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (56)

Rnd 9: *Work 2 hdc in 1st st, work 1 hdc in next 7 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (63)

Rnd 10: *Work 2 hdc in 1st st, work 1 hdc in next 8 st;* repeat from * to * Join with sl st to 1st stitch. Ch 1. (70)

*Pause here and make sure the crown measures between 6.5” and 6.75“ in diameter.

Rnd 11: *Work 2 hdc in 1st st, work 1 hdc in next 7 st; (work 2 hdc in next st, work 1 hdc in next 8 st) 3 times)* repeat from * to * 1 more time. Join with sl st to 1st stitch. Ch 1. (78)

Rnds 12 – 16: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1. (78)

Rnd 17: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 18: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

Rnd 19: Work 1 hdc into each st. Join with sl st to 1st stitch. Ch 1.

Rnd 20: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnd 21: Work 1 hdc into each st. Switch to Color B. Join with sl st to 1st stitch. Ch 1.

Rnd 22: Work 1 hdc into each st. Switch to Color A. Join with sl st to 1st stitch. Ch 1.

Rnds 23 – 27: Work 1 hdc into each st. Switch to Color C. Join with sl st to 1st stitch. Ch 1.

*Pause here and make sure the length of the hat measures just short of 9.5“ from crown to bottom of hat when folded in half. If not, continue to add rows of Color A then switch to Color C.

Rnd 28: Work 1 sc in each st around hat. Join with sl st to 1st stitch. Finish off.

 

Hit Print below or click here to download a pdf

Enjoy and please share your finished projects on any of my social media. 

Nicole-Colie's Crochet-coliescrochet.com

Copyright 2014 Colie’s Crochet. All rights reserved. You may use this pattern for personal use, gifts or charity items. Sales of finished items are permitted but designer requests that you link back to pattern and credit Colie’s Crochet with the original design. No part of this document may be reproduced or transmitted in any form including but not limited to electronic, mechanical, photocopying, or otherwise without prior written consent from the designer.

Be sure to follow Colie’s Crochet for updates and to see what I’m currently working on and to share pictures of your finished pieces from Colie’s Crochet patterns.

Colie's-Crochet-on-Facebook

Colie's-Crochet-on-Etsy

Colie's-Crochet-on-Twitter

Colie's-Crochet-on-Pinterest

Colie's-Crochet-on-Instagram

Colie's-Crochet-on-Google+

E-mail-Colie's-Crochet

 

 

Advertisements

11 thoughts on “Basic Striped Beanie

  1. straushouse

    Thank you for this pattern! I too am a tight Crochere and I have the same gauge as you – it is nice to use a pattern whose measurements work out for me.

    Question: Do you cut the yarn at each color change or carry it on the wrong side?

    Reply
    1. Nicole Post author

      Hi there! It really is up to your personal preference. I sometimes cut and weave in the ends and sometimes carry the yarn. I think it usually depends on the colors and the yarns I’m using, whether or not you can see it on the right side, or my mood or just plain laziness lol!

      Reply
  2. Arianne W

    I know that you list head circumferences for the different sizes, but I’m wondering what the width of the hats are supposed to be. I get my hats to measure the right lengths, so I’m hoping the width is right, too. For example, I just made a medium adult sized hat, and the hat measured 25 inches around. Would that be too wide for a 23′ head circumference, or is it okay?

    Reply
    1. Nicole Post author

      Hi! That will probably be way too big. If you read through the directions, I have you stop to measure diameter. As long as that is correct, it will fit well. Also in the beginning notes, I explain how to adjust if you are off. I highly recommend making a gauge swatch before starting any project. Hope this helps!

      Nicole

      Reply
  3. Jayley Wainwright

    I’m kinda a beginner crocheter. I am trying to make your basic striped beanie. I went to hobby lobby and found the yarn you suggested as well as the I 5.5mm hook. I’m not sure what I’m doing wrong… Every time I start crocheting it starts going into a cone shape. Then when I finish round 8 it’s only 5in in measurement. What am I suppose to do if it is too small? Should I add another round? Please help me!!!

    Reply
    1. Nicole Post author

      Hi Jayley! Yes keep adding rounds until you reach the desired circumference. I wouldn’t worry about the shape so much because you can always manipulate it after so it doesn’t look like a cone when the hat is finished. Be sure to work a gauge swatch as I mention at the beginning because you may need to change hook size to get the desired gauge that I mention. Hope this helps.

      Reply
  4. Christy Stillwell

    CAllie
    What yarn did you use for these darling hats? I love the colors you chose and so often I want to find good yarn with rich color!

    Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s